RemovALL™ 320 All Purpose
Architectural Paint Remover has proven it will effectively lift
thin film urethanes, lacquers, latexes, alkyd paints, and elastomeric's
from many types of substrates, including vinyl floor coverings and
other types of flooring.
Approximately 30 to 120 sq.ft./Gal. (1 to 2.2
sq.m./L) depending on the type of paint and thickness of the coating(s)
to be removed.
Above 55°F (13°C). If working in cooler temperatures
expect a longer dwell time. Keep from freezing.
The time required for
penetration varies according to the type of paint, the thickness
of the paint, and the temperature. Most paint systems require between
1 to 24 hours.
RemovALL™ 320 All Purpose Architectural Paint
Remover can be left overnight, but do not allow it to dry out.
If you are trying to remove wax, the process should not take
longer than 30 minutes to 1 hour.
Equipment & Tools:
This product is engineered for spray or brush
application. Airless sprayers are recommended.
Use only equipment
with chemical resistant components such as a Hero 85 SEL. A typical
medium size airless sprayer is capable of spraying this product.
Equip the sprayer with a tip size of 0.019 inches or larger. (Example:
a 519 or 425 tip).
Other equipment: brushes, short nap rollers,
scraper, masking tape, polyethylene sheet, pressure washer, electric
drill with mixer, empty pails for clean-up, running water, rags.
safety procedures should be followed at all times while handling
the product. Refer to the Material Safety Data Sheet for important
health / safety information before use.