RemovALL 320 Architectural paint
remover Brush Grade.
|
RemovALL 320 Napier Environmental
Architectural paint remover Brush Grade
|
| |
 A
product of Napier Environmental Technologies RemovALL 320 is a Brush Grade water-based paint remover that is biodegradable,
user-friendly, environmentally safe and practically odor-free.
This powerful paint stripping formula is engineered to remove graffiti and
most paints including urethane, lacquer, varnish, alkyd and latex from wood,
masonry, brick and other porous substrates.
RemovALL 320 works best when used on porous surfaces however
it will provide adequate results when used on a non-porous surface.
For normal stripping of a non-porous surface, we recommend using RemovALL
210 or 220.
Scraping or power washing will always be necessary to complete
the removal process. Pressure washing is the manufacturer’s recommended
method. Regardless of method used, the stripped surface must be rinsed with
water to remove all chemical residues prior to repainting the surface.
RemovALL 320 is great for use in floor stripping applications and is often
used by hospitals and/or maintenance departments.
RemovALL products are powered by patented SARA Technology. This technology
utilizes the physical forces released by chemical reactions to break the
bond between the paint and the substrate. Coatings lift off cleanly and
can be easily removed.
Learn more about the Selected Adhesion Release Agent (SARA) the
Technology
Behind the Product.
|
|
|
Product Alert!
Several customers have informed us that RemovALL 320 will lift JFB Hart
Coatings HP-100, HP-101, HP-105, HP-146 and HP-400 GlossTek.
|
|
Architectural Paint remover
- Brush Grade
|
|
RemovALL
320
Tough on Paint – Easy on the Environment™
|
|
|
Product Highlights |
 |
Coverage
- approx. 40 - 120sq ft. per gallon. |
|
|
Non-hazardous,
Non-toxic, Non-flammable, Low odor. |
|
|
Reduces
labor, downtime and pollution. |
|
|
Uses patented
technology of the Selective Adhesion Release Agent (SARA). |
|
|
Removes
most paints including urethane, lacquer, varnish, alkyd and
latex from wood, masonry, brick and other porous substrates including
graffiti. Also
removes lead based paints, however this may not be permitted in
your area.
(see social responsibilities) |
|
|
Recommended
for use on indoor or outdoor porous surfaces. |
|
Learn more about the technology
behind the product
the Selected Adhesion Release Agent SARA
|
|
|
click here
to purchase
Napier Environmental Technologies products
|
|
|
RemovALL 320 - Performance Information
|
|
|
Our test board
consists of:
1 layer Rust-Oleum spray (yellow)
2 layers ordinary latex (navy blue)
2 layers ordinary latex (red)
2 layers oil-based Rust-Oleum (pink)
2 layers Benjamin Moore (white dove)
2 layers Amer Tradition Wall & Trim (tan)
2 layers Amer Tradition Acrylic HP (orange)
2 layers Olympic Ext Latex Satin (brown)
2 layers Olympic Ext Latex Flat (green)
2 layers Living Color Krylon (elderberry)
1 layer Benjamin Moore (white dove)
Total painted
layers = 20 |
|
| |
|
Our test
board has 20 painted layers...
We applied RemovALL 320 to our test board in a temperature controlled environment.
When applying the product it is important to follow the manufacturer’s instructions
for stirring. Never shake. Stirring allows the product to mix properly
and conform to proper brush grade consistency. The manufacturer recommends
use of a high speed drill mixer (if available) or to hand stir allow ample
time to properly complete the task.
|
|
... we checked
up on the test after 12 hours ...
RemovALL 320 had already begun to lift on its own. We could easily see cracking
and separation between layers. We did notice that the product was pulling
away (or shrinking) around the edges of the initial application. Although
our tests show the remover is still working in these area's it is prudent
to re-apply after several hours to these spots. This will make removal
easier.
|
| |
|
|
... at 24
hours our timed test was complete.
We used the ProGrip2 putty knife to easily remove 15 of the 20 painted layers.
This test board had more layers than in the similar
RemovALL 220 test.
Since RemovALL 320 was designed for use on wood (or porous) surfaces, we
assumed more dramatic results. And we were right! Plus the product was still
plenty wet after the 24 hour period which made removal easy. The painted
layers lifted right off with little effort in a stringy pasty-like substance.
In harsher environments (wind, rain, temperature or high humidity) you will
need to check removal times more closely.
|
|
|
Napier Technologies RemovALL 320
Brush Grade Architectural paint remover
|
|
