RemovALL paint removers for the
Do-It-Yourselfer.
|
Napier Technologies
Removall
paint removers for the Do-It-Yourselfer
offer new and better ways to strip paint
without all the harsh chemicals.
|
| |
Removall paint removers for the Do-It-Yourselfer
are just plain old easy to use. Apply a thick coat, walk away
and let the remover do the work. The paint simply wrinkles up when
the job is done, thus signaling you to commence the removal process.
These unique patented products have been featured on national TV because
they are capable of removing the toughest industrial coatings while still
remaining safe enough for the home user and environment. With RemovALL
it's simply a matter of time!
|
|
|
RemovALL
Paint removers for at home Do-It-Yourselfer
|
|
Interior Wood & Furniture remover
|
|
|
Product
no
longer
available |
|
|
Exterior Wood
Paint remover
|
 |
Product
no
longer
available |
|
|
RemovALL products
are being used in many different industrial markets. For example,
the paint removers are being used to strip aircraft all over the world.
These same industrial strength products are now being offered to the Do-it-yourself
market for the first time.
|
|
Concrete & Masonry
remover
|
|
Product
no
longer
available
|
 |
|
|
Metal remover
|
|
Product
no
longer
available
|
 |
|
|
RemovALL - Directions for
Use for Do-it-yourself product
line
|
|
TEST PATCH:
A test area will indicate the time required to lift coating and the
suitability of the product for the substrate.
PREPARATION:
Plants should be kept moistened with water or covered during remover application
and removal. Surface temperatures should be higher than 20° C (65°
F). Product will work slower at cooler temperatures. Pour the product out
into a paint tray or bucket. If water seems to have separated out, stir
product until homogenous. If surface is vertical and glossy or greasy,
the remover may slide down. Roughen up the surface by light sanding using
medium grit sand paper prior to remover application
COVERAGE:
Between 60 to 70 sq. ft. per US gallon (1.5 to 2 sq. m. per L)
DIRECTIONS:
 Apply
a thick, even layer of remover onto the surface using a paintbrush or an
airless sprayer. remover thickness should be such that the painted surface
is completely invisible.
Once
applied, leave the remover alone. Most coatings will take between 1 to 6
hours to lift. PAINT WILL WRINKLE WHEN THE JOB IS DONE. For best results,
leave the remover on overnight.
Check
periodically during the waiting period, to ensure that the paint is completely
covered with remover. If the painted surface becomes visible again, due
to absorption of the remover into the paint, re-apply a light layer of remover.
The remover
should remain wet and active till the paint wrinkles. If hot and windy conditions
cause drying, re- apply a light coating.
Once
paint has lifted / wrinkled, use a scraper, squeegee, pressure washer or
wet vacuum to remove it. Wood should always be scraped or pressure washed
in the direction of the grain.
The remover
is engineered to lift several layers of paint in one application. However,
if there are too many layers, remove the layers lifted in the first application
and re-apply the remover.
The stripped
surface must be rinsed with water to remove all chemical residues before
repainting.
Collect
lifted paint and remover and dispose of in accordance with local government
regulations.
|
|
|
|
Napier Technologies
RemovALL, The Name Says It ALL
|
|
