buy Natural Deck Oil Transparent Wood Finish online


View similar products

  Item: Natural Deck Oil Transparent Wood Finish
  Size: 1-gallon or 5-gallon
  Appearance: Color depends on tint used
  VOC Content: 28 g/L or 0.23 Lbs./US Gal.  
  Case Pack: 2 gallon(s) to 1 case or single 5-gallon pail.
  Available In:

• Clear Tone
• Natural Tone
• Cedar Tone
• Redwood Tone
• Chestnut Tone
• Honey Brown Tone

  Quick Product Facts  

Natural Deck Oil™ allows for immediate coating of damp or fresh cut wood. It is a waterborne blend, penetrates deep into the wood, rejuvenating and safeguarding wood color and integrity. Natural Deck Oil™ protects wood from the sun’s harmful ultraviolet radiation and causes water to bead and roll off the surface, is safe to use, has a low odor and is easy to clean up with cold water:

  • Water-based formula
  • Low odor
  • Superior UV protection
  • Rejuvenates wood color
  • Deep penetrating formula
  • Beads water
  • Non-flammable
  • Biodegradable
  • Easy water clean-up
  • Ecologically friendly


  Natural Deck Oil™ Transparent Wood Finish

buy Natural Deck Oil Transparent Wood Finish onlineTypical Uses:
Natural Deck Oil™ is ideal for all types of wood including pressure treated pine, fir, cedar, redwood, cypress, oak, teak, mahogany, IPE, and other exotic species of wood.

Coverage is approximately 150 to 250 square feet per gallon, per coat substrate dependant.

Optimum Temperature:
Ensure surface temperature is between 50°F (10°C) and 100°F (38°C). The Hand Touch Test™ is when the wood feels hot to touch.

Avoid application of product when the daily low is below 50°F (10°C) or rain is in the immediate forecast.

Dry Time:
Natural Deck Oil™ will be dry to touch in 3 to 4 hours. After 8 hours at 68°F (20°C) the newly coated surface is safe to walk on.

A complete cure of the coating for walked on surfaces is 48 to 72 hours at 65°F (20°C) and less than 50% humidity. Additional second coat must be applied within 6 hours of previous coat.

Equipment & Tools:
Prepare wood with appropriate BIO-WASH™ product then using a nylon or polyester paintbrush, apply at least two coats of Natural Deck Oil™. Apply second coat within 3 to 4 hours after the first coat. Stir Natural Deck Oil™ well prior to use.

Safety Precautions:
Proper safety procedures should be followed at all times while handling the product.  Refer to the Material Safety Data Sheet for important health / safety information before use.


Clean with Simple Wash™ yearly. Maintain the beauty of your deck by simply using Stain Prep™ as directed before applying a single maintenance coat of Natural Deck Oil™.

Copyright (c) 2002 - 2014 Small's Hardware Inc. All rights reserved. Privacy Notice | Contact Us
All trademarks and registered marks are the property of their respective owners.
DTEP is a registered trade name of Small's Hardware Inc. State of Ohio
Mailing Address • 109 S Wayne Ave • Lockland OH • 45215
Visit our StoreFront