DoradoStrip 3032 Architectural
and Janitorial Paint remover.
|
DoradoStrip™
3032
Architectural / Janitorial Paint remover
|
|
Product Facts!
DoradoStrip 3032 can help save you
money over nationally recognized name brand chemical paint removers
by offering similar if not better performance characteristics at a lower
overall cost per gallon.
|
| |
 DoradoStrip™
3032 is a low VOC, water-based biodegradable,
low odor paint remover. DoradoStrip 3032 will effectively lift urethanes,
and alkyds from vinyl tiles and other types of flooring, as well as interior
architectural coatings. Recommended for use on nearly all substrates
DoradoStrip 3032 contains no TAP's or Hap's, offers easy cleanup with soap
and water or denatured alcohol.
DoradoStrip 3032 offers you the same usability in all performance measures
as similar paint stripping products albeit at a lower cost. DoradoStrip
3032 is a quality replacement for most expensive chemical paint removers
and is designed for use on substrates including steel, aluminum, concrete,
masonry, wood, (lead based paints) or in any area where worker safety or
damage to delicate equipment may be of concern.
Due to its thinner consistency of spray machine application the manufacturer
suggests methods other than brushing due to the inherit realization that
these methods may produce lower film builds and inconsistent product thickness.
This may lead to product performance under optimum ability. You should
always sample the product and prepare a test area to determine suitability
for your intended project and application method. This not only helps
save you money but enhances your experience with the product and helps you
gain valuable insight into dwell times, performance and suitability.
|
|
|
DoradoStrip™
3032
Janitorial
Industrial Paint remover
|
|
Features and
benefits:
|
 |
Water Based, Non Flammable
|
|
|
Does not affect glass.
|
|
|
Contains No Toxic or Hazardous
Air Pollutants.
|
|
|
Easy clean up with soap &
water or denatured alcohol.
|
|
|
Non-ozone depleting with Low
odor.
|
|
|
Easily sprayed with standard
equipment.
|
|
|
Recommended
Usage Information:
|
|
|
Area of low ventilation areas or occupied
areas. |
|
|
Wax and urethane coatings from waxed vinyl
flooring. |
|
|
Removal of architectural coatings from walls
and ceilings from building interiors. |
|
|
Uncured floor coatings. |
|
|
| |
|
|
DoradoStrip
3032 -
Performance Information
|
|
|
Our test board
consisted of:
1 layer Rust-Oleum spray (yellow)
2 layers ordinary latex (navy blue)
2 layers ordinary latex (red)
2 layers oil-based Rust-Oleum (pink)
2 layers Benjamin Moore (white dove)
2 layers Amer Tradition Wall & Trim (tan)
2 layers Amer Tradition Acrylic HP (orange)
2 layers Olympic Ext Latex Satin (brown)
2 layers Olympic Ext Latex Flat (green)
2 layers Living Color Krylon (elderberry)
1 layer Benjamin Moore (white dove)
Total painted
layers = 20 |
|
| |
|
Our test
board has 20 painted layers ...
We applied RemovALL 320 to our test board in a temperature controlled environment
of 70 degrees. For application we used a 2.5in Chip Brush (this does
not follow the manufacturers recommended application method). We made
sure to put on a heavy even coat, kind of like the a pop tart coating.
The product was very thin and had the same consistency of Elmer's Glue.
It had a floral/fruity odor in the pail and was yellow in color.
|
|
... at 24
hours we couldn't speak. We were too busy wondering what this product
had been up to ...
Apparently DoradoStrip 3032 had been up to a lot as it had already begun
to lift on its own. As you can easily see the paint is popping up in sections.
Too bad we can't offer you a topographical view. It's even more amazing
in person. Although we waited 24 hours we felt that the same (visual
results) were present after 12 hours. We waited 24 hours soley because
that the way we do it ...
|
| |
|
|
... finally
we get to take the paint off!
We used the ProGrip2 putty knife to easily remove 15 of the 20 painted layers.
The White softened layer didn't give us much trouble but the red layer was
not willing to budge at all! This was the exact same result we got
in our RemovALL 320 test.
Click here to see
for yourself. We assumed lesser results since we did not follow
the manufacturers recommendation for application method. In harsher
environments (wind, rain, temperature or high humidity) you will need to
check removal times more closely. Obviously we could have removed
the product after just 12 hours and perhaps received same or similar results.
Next time we will test different variations.
|
|
|
DoradoStrip 3032
offers you a cost effective stripping solution |
|
WARNING!
If you scrape, sand, or remove old paint, you may release
lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE
SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT
WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a property fitted NIOSH-approved
respirator and prevent skin contact to control lead exposure. Clean up carefully
with a HEPA vacuum and a wet mop. Before you start, find out how to protect
yourself and your family by contacting the USEPA National Lead Information
Hotline at 1-800-424-LEAD or log on to
www.epa.gov/lead.
In Canada contact a regional Health Canada office. Follow these instructions
to control exposure to other hazardous substances that may be released during
surface preparation. DoradoStrip 3032 is not approved for Aviation Use.
|
|
DoradoStrip
3032
Architectural / Janitorial paint remover
|
|
