After Strip and Lead Clean paint
remover wash.
|
Ready Strip Wash and Lead Clean.
Paint remover wash, lead dust cleaner, paint de-glosser and
Multi-Purpose cleaner. We've got you covered...
|
 |
Ready Strip Wash does this...
|
...and Lead Clean this
|
|
 |
Gently removes the residue and softened
layers.
|
|
|
Cleans and prepares the surface for
refinishing.
|
|
|
Helps lift stains from wood.
|
|
|
Environmentally safe solution.
|
|
|
Use on interior and exterior surfaces.
|
|
|
Use to re-activate remover that is
dry to the touch.
|
|
 |
Helps eliminate lead dust, the most
common cause of lead poisoning.
|
|
|
Designed to hold lead in solution
for effective removal.
|
|
|
Excellent multipurpose cleaner for
dirt, stains, grease, grime and unwanted marks.
|
|
|
Built in deglossing agent helps insure
proper adherence of your paint.
|
|
|
Can also be used as a post paint removal
clean up product.
|
|
| |
Friendlier for you ●
Friendlier for your Environment |
|
| |
|
| Lead
Clean lead dust cleaner |
|
|
| |
Description
- Ready Strip Wash paint remover clean-up safely and gently removes the
residue and softened layers sometimes remaining after paint or varnish removal.
It cleans and prepares the surface for refinishing. It also helps remove
stains from wood. This environmentally safe solution contains no methylene
chloride or harsh chemicals, is nonflammable, non-combustible, and biodegradable.
It works on interior and exterior surfaces including wood, plaster, concrete,
brick, stone, metal, marble, fiberglass, veneers, etc. (Do not use on
sheetrock, plastic, rubber or linoleum surfaces).
|
Description
- Lead Clean lead dust cleaner is a water-based,
biodegradable, lead dust cleaner & paint deglosser. A special NON-TSP formula
eliminates lead dust, the most common cause of lead poisoning. Lead Clean
lead dust cleaner is designed to hold lead in solution for effective removal,
It is also an excellent multipurpose cleaner on dirt, stains, grease, grime
and unwanted marks. It is designed to react quickly and work efficiently.
It is specifically engineered to have excellent wetting action to better
penetrate surface soils. As a post paint removal product, it insures effective,
time saving clean-up. Lead Clean lead dust cleaner is also two products
on one. For use prior to lead paint encapsulation, let it dwell longer and
a special deglossing agent helps insure proper adherence.
|
|
| |
|
|
Lead Dust & Multi-Purpose cleaner
use |
|
|
| |
|
|
Use immediately after paint or varnish removal. |
|
|
If bottom layers appear intact, or surface is very
tacky or gummy, then there is paint or varnish remaining on the surface.
Therefore, reuse Back to Nature Paint & Varnish Removers as directed,
before applying Ready Strip Wash paint remover clean-up. |
|
|
Apply Ready Strip Wash paint remover clean-up liberally
onto the surface. Allow After-Strip to stay on the surface approximately
1-2 minutes. |
|
|
Use a cloth, stripping pad or nylon brush to scrub
surface with Ready Strip Wash paint remover clean-up. On wood, rub back
and forth along the grain of the wood. |
|
|
Use a second application where necessary. |
|
|
After surface is clean, wipe down with a dry cloth
and let dry a minimum of 24 hours. Surface should be completely dry
before refinishing. |
|
|
If after using Ready Strip Wash paint remover clean-up,
stubborn paint or varnish remains on the surface, reuse Back to Nature
Paint & Varnish Remover and repeat application of After-Strip where
necessary. |
|
|
|
As a Household lead dust cleaner, Lead-Clean should
be used full strength. As a commercial lead dust cleaner, multi-purpose
cleaner, or post paint removal clean-up product, Lead-Clean may be used
full strength or diluted up to 3 to 1 with water. |
|
|
Apply Lead Clean lead dust cleaner using a cloth,
sponge, trigger spray or garden type sprayer for larger areas. |
|
|
Wipe Lead Clean lead dust cleaner onto the surface
- work in with a brush or pad for stubborn areas. Allow to dwell on
the surface for up to 5 minutes. |
|
|
Wipe down with a wet sponge/cloth and let dry. |
|
|
When repainting after paint removal, let dry approximately
1 Hour before applying new finish. |
|
|
Hepa vacuum where necessary. Inspect visually and
with wipe sample where necessary. |
|
|
Use second application when necessary. As a lead
dust cleaner, do not reuse applicators. |
|
|
| |
|
Ready Strip Wash Safety Instructions |
|
|
Lead Clean Safety Instructions |
|
|
| |
Due to the sensitive nature of certain
person's skin and eyes, chemical resistant gloves and safety glasses are
recommended. Avoid eye contact. If eye contact occurs immediately flush
with water for 15 minutes. Avoid prolonged and repeated contact with skin.
If skin contact occurs, wash with soap and water Do not take internally.
If swallowed do not induce vomiting. Give 1 or 2 glasses of water and call
a physician immediately.
|
Safety goggles or face shield are recommended
for eye protection. Protective gloves such as
neoprene,
nitrile gloves are also recommended. In case of eye contact flush with
plenty of cool water for 15 minutes, lift lids, do not rub. Get medical
attention. In case of ingestion, drink water or milk to dilute. Do not induce
vomiting. Get medical attention immediately.
|
|
| |
KEEP OUT OF REACH OF CHILDREN
- Dispose of properly
|
|
| |
|
|
|
| |
|
Click to Buy |
Click to Buy |
|
16-oz
Ready Strip Wash Paint Remover Cleanup
$8.99
1-ga
Ready Strip Wash Paint Remover Cleanup
$29.98
|
22-oz
Lead Clean
Paint Remover Wash
$10.79
1-ga
Lead Clean
Paint Remover Wash
$31.98
|
|
|
|
As a paint deglosser, Lead Clean lead dust cleaner
should be used full strength. |
|
|
Clean off surface dirt using a damp cloth. |
|
|
Apply Lead Clean lead dust cleaner using a cloth,
sponge, trigger spray or garden type sprayer for larger areas. |
|
|
Work Lead Clean lead dust cleaner into the surface
using brush or pad if necessary. Allow Lead Clean lead dust cleaner
to dwell on the surface approximately 10-15 minutes. |
|
|
While surface is still wet, wipe down with a dry
cloth. If Lead Clean lead dust cleaner has dried on the surface, wipe
down with a wet
sponge and allow to dry. |
|
|
Let dry approximately 1 hour before applying encapsulant
or new finish. |
|
|
Inspect visually. Do test patch where necessary. |
|
|
Use second application when necessary. |
|
|
| |
|
Lead Clean
- Coverage and Dilution Ratio Chart |
|
|
| |
Full Strength: |
400-450 sq. ft |
Dilute 2-1 (3 gals): |
1200-1350sq. ft |
|
| |
Dilute 1-1 (2 gals): |
800-900 sq. ft |
Dilute 3-1 (4 gals): |
1600-1800 sq. ft |
|
|
